Roof Restoration Perth WA
We specialise in -
Tiled roof restoration and coating.
Colorbond, Iron and Decramastic Roof Restoration and painting.
Asbestos roof coating (we also encapsulate the asbestos fibres!).
All roof maintenance procedures
Cover skylights, solar panels etc. to ensure no overspray from roof coating.
*Spray a Surface Steriliser over moss susceptible areas
Seal or prime surface as per Australian Standards and Manufacturer’s Recommendations, this is applicable for Perth WA (this may not be required on clay tiles)
Apply 2 coats of Colour specified Acrylic Membrane coating. (Membrane coating on average is 6 times thicker than normal paint)
*Randomly apply 2 tone colour
*Optional Roof Restoration Procedure
Iron, Colorbond and Decramastic Roof Restoration
Source and fix roof leaks
Check and change rusted roof tek screws
Check and repair flashings (dektites, skylights, A/c’s etc.)
High Pressure Water Clean entire roof surface. Removal of dirt, oxidisation, moss, lichen etc. is essential to the roof coating process.
Prime with water based, 2 pack epoxy or solvent based products dependant on surface and environmental conditions
Apply 2 coats of Color specified Acrylic Membrane coating. (Membrane coating on average is 6 times thicker than normal paint)
- All surfaces can be applied with the Cool Roof product reducing heat and energy consumption.
- Industrial applications of the Cool Roof have a slightly different procedure than above
- The above procedures are meant for general information purposes only. Although unlikely to change all procedures are reviewed on each individual job to ensure the best quality.
- Roof Restoration Specialists Perth Western Australia